a
b
c
c
Dimensions
6
3
Installation
Place the mounting block in the
centre of the marked bracket
position. Mark the centre of
the hole. Repeat for the other
block (
a
).
Using a suitable 6mm masonry
drill bit for the wall plug, drill
the wall at the centre of the 2
marked positions.
Fix the blocks in position using
the supplied wall plugs and
screws make sure that the
notch is at the top on the top
bracket and opposite position
at the bottom (
b
).
Refit the riser assembly by
placing the brackets onto the
mounting blocks and secure by
tightening the grub screw with
the supplied hex key (
c
).
30mm
221mm
79mm
130mm
30mm
25mm
15mm
600mm
Top block
Top block
Notch
Top bracket
Bottom block
Bottom
block
Bottom
bracket
Hex key
Hex key
Mounting block
Top
Bottom
