VADO OMIKA 100 Installation Manual Download Page 2

2

  

3

Please read these instructions carefully before starting installation and keep for future 

reference.
Remove all packaging and check the product for missing parts or damage before 

starting installation.
Any alterations made to this product and fittings may infringe water regulations and 

will invalidate the guarantee.
The installation must comply with all Local/National Water Supply Authority 

Regulations/Byelaws and Building and Plumbing Regulations.  

To be installed in accordance with BS EN806.
We strongly recommend that you use a qualified and registered plumber.

General installation

This fitting is a mixing device and therefore water supplies should be reasonably 

balanced.
When installed, the fitting must comply with the requirements of the Water Supply 

(Water Fittings) Regulations 1999 and Scottish Byelaws 2004. Please check with your 

local water undertaker if there is any uncertainty.
Before making any inlet pipe connections, all supply pipes MUST be thoroughly flushed 

to remove debris. Failure to do so could result in damage or low flow from the mixer 

unit. Water Supply (Water Fittings) Regulations 1999 Schedule 2 Section 13.
The fitting of isolating valves to the inlet feeds is advised for ease of maintenance.
Please take great care when installing this mixer not to damage its surface.
Please note if installing in an enclosed environment, access should be left for servicing 

and maintenance. No costs relating to inadequate access can be accepted.

Operating Specifications

Operating Pressure

Minimum operating pressure - 1 bar 

Maximum operating pressure 5 bar

Important - please read

Contents of Packaging

Valve body

Rubber washer

 

Spacer

 

(For use with thin work tops up to 7mm)

Flexible hoses

 

(Red for hot,  

Blue for cold)

Metal washer

Threaded rod

Nut

Seal

Fixing kit box

 

(Nut, Threaded rod, Seal Rubber washer, 

Metal washer)

FIXING KIT BOX

Mono Basin Mixers

OMIKA

Keep for future reference

Installation Guide

100M

100

100E

WHERE

INSPIRATION

FLOWS

OMIKA

Mono Basin Mix

er

User Guide
Keep for future 

reference

 

Installation guide & 

User manual

Summary of Contents for OMIKA 100









Reviews: