17
01.03.2017
ST 600-900S
2. Then press on the plus or mi-
nus sign a number of times until
the required pressure for the
following harrow is reached.
- As a guide a value of 20 can
correspond to the tare weight.
1 is maximum relieved and 0 is
fulfilled.
- If you want the following har-
row to remain raised all the time
you are driving, go to the basic
settings menu and set Following
harrow type to Off.
Headland
Furrow
1. Select the symbol for headland or furrow. It will then be marked in green.
C.
Hydraulic following harrow
Press the button to access an adjustment menu for the following harrow.
This menu allows you to have different following harrow pressures for headland and furrows.
2.
Drive checks
A.
Manual feed output.
If you want to start feed output from a stationary position, e.g. in a corner, or during output verification,
press and hold the button marked in green.
Preselect the speed in the Basic settings menu.
B.
Lift stop.
For retracting the bout marker arms without lifting the machine, e.g. around wells or posts.
Press the button and use the lifting ram to pull in the bout marker arms.
When you have passed the obstacle, use the lifting ram to extend the bout marker arms again.
Press the button again otherwise it will return to its switched off position after 30 seconds.
The button remains green as long as this is activated.
A.
B.
C.
E.
F.
G.
D.
H.
E-Contr
ol
