Vaderstad RAPID RDA S Series, Manual

Page: 33 / 118

RDA 600-800 S
Ver.3 29/06/07 33
2.17 Calibration, hydraulic feed output
1 Set the seed boxes. See ”
2.15 Seed box settings with hydraulic feed output” on page 30
.
Figure 2.40
2 Use the enclosed bags for calibration. Prior to calibration, reset the scale with the bags empty.
Push the bags into the seed boxes from below through the spring-loaded doors.
Figure 2.41
3 Switch off the hydraulic fan by turning the lever to position B.
4 Start the tractor and switch on the hydraulic connector used for driving the fan and feed output.
A
B