Vaderstad RAPID RD 300 F, Instructions Manual

Page: 31 / 114

RD 300-450 F
Ver.1.3 07/06/01 31
D
Keep the hydraulic lever on the tractor in the lowering position (
Note!
"Floating" position
must not be used) until the ram ("folding ram") is fully refilled, locking the wing sections in
the unfolded position. See “Figure 3.13”.
Figure 3.15
E
Always drive forwards when the seed drill is lowered to its working position, to prevent the
seed coulters becoming clogged.
F
Lower the tool bar to its working position.
3.4.2 Changing to transport position
A
Switch off the low-lift function at the control box. Raise the seed drill to its top position.
Note!
When the wing sections are being folded and unfolded, the mid section must always be in its
fully raised position.
B
Fold the machine and check that the locking bars are fully engaged.
C
Check that front implements and trailing implements do not exceed the 3 metre transportation
width limit.
Figure 3.13 Figure 3.14