Instructions and settings
18
11.07.2011
ver. 3
2.3
Setting the levelling units
Figure 2.4
The height of the levelling units is adjusted using a crank handle. The crank handle has two alter-
native mounting points in the levelling units, so that optimum height adjustment should always be
possible.
The levelling unit must be adjusted so that the soil cover behind the implement is as even as pos-
sible. As the levelling unit is mounted on the compaction roller’s chassis, the setting of the level-
ling unit does not need to be adjusted in the event of minor changes in the working depth.
NOTE!
The work results of the levelling units are usually best if they are set in a relatively shallow
position. If the levelling units are wound down to a depth that is too great, this may cause the op-
posite effect, i.e. an uneven ground surface behind the implement.
Figure 2.5
OK
Summary of Contents for Cultus CS 300
Page 2: ...2 11 07 2011 ver 3 ...
Page 4: ...4 11 07 2011 ver 3 ...
Page 37: ...CS 300 400 11 07 2011 ver 3 37 5 Hydraulic diagram 5 1 CS 300 400 Figure 5 1 ...
Page 41: ......
