background image

TRIO I/O and TRIO Mic Solutions 

 

Vaddio TRIO MIC Solutions - Document Number 342-0568 Rev A      

Page 11 of 16 

S

TEP

-

BY

-S

TEP 

I

NSTALLATION 

I

NSTRUCTIONS

 

 
 

TRIO Mic I/O Installation: 

Locate the TRIO Mic I/O a centralized location near the room’s audio mixer. Follow steps below to install devices: 
 

Diagram: Basic System Connections 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 

 
STEP 1:

   

Connect the provided 18 VDC Power Supply to the TRIO Mic I/O.   
 

STEP 2:

   

Connect the Cat-5 cable between the TRIO MIC I/O and the TRIO Ceiling or Table Mic Array 
 

STEP 3:

   

Connect the balanced line level outputs from the TRIO Mic I/O to the room’s audio mixer.  
 

STEP 4:

   

Connect the line level output from the room’s audio mixer to the AEC Reference input on the TRIO Mic I/O.  
 
 

Optional Accessories

 - The TRIO Mic I/O has an optional accessory kit:  

 

 

Rack Mounting Kit:

  The rack kit provides a method for the TRIO Mic I/O to be installed in a 1RU space 

within a rack.  The Rack Kit includes two rack ears (one long and one short).  The rack ears are mounted on 
the sides of the TRIO Mic I/O using the existing screws included on the device.  

 
 
 
 
 
 
 
   
 

TRIO MIC I/O - Rear 

Power  

Supply 

Echo 
Canceled 
Line Audio 
to Mixer 

AEC Reference 
From Mixer 

Mic 1 

Mic 2 

 

 

➊ 

 

Summary of Contents for TRIO MIC I/O

















Reviews: