background image

Care and

Cleaning

• Do not attempt to take this device apart (other then for the reasons stated in this

manual).  There are no user-serviceable parts inside.

• Keep this device away from food and liquid.

• To clean the exterior, wipe with a damp cloth.  Do not use abrasive chemicals.

• When necessary, replace the battery in the transmitters with CR2032 button style

battery.

Do not store or operate this device under the following conditions:

• A temperature above 104

o

F (40

o

C) or below 32

o

F (0

o

C)

• Environments with high humidity

• Dusty environments

• In inclement weather

• Under severe vibration

Operating and

Storage

Conditions

3

Notes

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

__________________________________________________________________

Summary of Contents for TouchVIEW

Page 1: ... TouchVIEW 1 Unpacking Your TouchVIEW TouchVIEW Receiver see Figure 1 The receiver ouputs are connected to Vaddio s ControlVIEW or ControlVIEW Expander inputs Using the terminal block attach wires from button outputs one through four to the preset inputs on the back of the ControlVIEW Only one wire per connection connections can not be shared with an input from another source on the ControlVIEW Th...

Page 2: ...on the receiver and all four of the transmitters Receiver Setting the Address 1 Using a small Phillips screwdriver remove the four screws on the top of the receiver 2 Carefully pull the top cover off the re ceiver 3 Locate the RED DIP Switches 1 8 When shipped all of the switches will be in the OFF position 4 Set the switches to the same address as the transmitter remember this address 5 Carefully...

Page 3: ..._____ __________________________________________________________________ __________________________________________________________________ __________________________________________________________________ __________________________________________________________________ __________________________________________________________________ ___________________________________________________________...

Page 4: ...product s has been disas sembled or damaged through misuse accident modifications or unauthorized repair Shipping and Handling Vaddio will not pay for inbound shipping transportation or insurance charges or accept any responsibility for loss and or damage from inbound transit Vaddio requires that all overseas returns are shipped via UPS Vaddio will pay for outbound shipping transportation and insu...

Reviews: