Managing Access and Passwords
S
ECURITY PAGE
Set the camera according to your organization's security policies:
n
Allow or deny access to the Camera screen without logging on (Allow Guest Access)
n
Set whether inactive sessions log off automatically or not (Automatically Expire Idle Sessions)
n
Change the password for the
admin
account
n
Change the password for the
user
account
n
Allow or disable access via Telnet (by default, access via Telnet is enabled)
Some of these capabilities may be absent if the camera has not been updated with the latest firmware.
Note
Consult your network security specialist before changing any of these settings.
Note
For best security, Vaddio strongly recommends changing the user and admin passwords from
the default.
Using the default passwords leaves the product vulnerable to tampering.
Disabling Telnet Access
S
ECURITY PAGE
If your installation does not require camera access via Telnet, you may choose to disable the camera's
internal Telnet server.
51
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
