Configuring Camera Behavior
Camera configuration tasks are available on these pages:
n
Camera – Color and lighting adjustments, presets (including custom Home), and real-time camera
control
n
System (DIP Switches tab) – Camera identification (Camera 1, 2, or 3 on the remote), status light
behavior, codec control mode, and more
n
Streaming (available with Quick-Connect USB and Quick-Connect USB Mini only) –
o
Quick-Connect USB Mini: USB device name and color space only; both are optional
o
Quick-Connect USB: Streaming mode (USB or IP); USB device name and color space; IP video
quality, bandwidth, and more
Note
Vaddio's RoboSHOT series cameras all have very similar web interfaces. Some of the screen shots in this
manual may be from other models in the RoboSHOT series.
Setting the Custom Home Position and Other Preset Shots
C
AMERA PAGE
The camera's default home position is 0° pan and 0° tilt; you can set a different home position.
You can also define other presets, for shots that you will want to use repeatedly. Presets may include
lighting and color settings and may specify Tri-Synchronous Motion or global preset speed settings.
Note
Storing a preset overwrites any information that was previously associated with that preset. The Store
Preset dialog does not show which presets have already been defined. Vaddio recommends renaming
presets when you store them.
To store a preset or custom home position:
1. Set up the shot.
2. Select Store to open the Store Preset dialog.
3. Select the preset to define, then save it.
60
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
