network ping
Sends an ICMP ECHO_REQUEST to the specified IP address or hostname.
Synopsis
network ping [count <count>] [size <size>] <destination-ip>
Options
<count>
The number of ECHO_REQUEST packets to
send. Default is five packets.
<size>
The size of each ECHO_REQUEST packet.
Default is 56 bytes.
<destination-ip>
The IP address where the ECHO_REQUEST
packets will be sent.
Examples
>
network ping 192.168.1.66
PING 192.168.1.66 (192.168.1.66): 56 data bytes
64 bytes from 192.168.1.66: seq=0 ttl=64 time=0.476 ms
64 bytes from 192.168.1.66: seq=1 ttl=64 time=0.416 ms
64 bytes from 192.168.1.66: seq=2 ttl=64 time=0.410 ms
64 bytes from 192.168.1.66: seq=3 ttl=64 time=0.410 ms
64 bytes from 192.168.1.66: seq=4 ttl=64 time=3.112 ms
--- 192.168.1.66 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.410/0.964/3.112 ms
>
Sends five ECHO_REQUEST packets of 56 bytes each to the host at 192.168.1.66.
>
network ping count 10 size 100 192.168.1.1
Sends 10 ECHO_REQUEST packets of 100 bytes each to the host at 192.168.1.1.
The command returns data in the same form as above.
system reboot
Reboots the system either immediately or after the specified delay. Note that a reboot is required when
resetting the system to factory defaults (system factory-reset).
Synopsis
system reboot [<seconds>]
Options
<seconds>
The number of seconds to delay the reboot.
Examples
Reboots the system immediately.
>
system reboot 30
Reboots the system in 30 seconds. The response is in the same form; the system
message appears at the end of the delay.
86
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
