Back of the Camera
Rear panel connections are identical for the RoboSHOT 12 and RoboSHOT 30 cameras.
n
Network RJ-45 connector:
Connect to the network for control via the web interface or Telnet session.
n
HD Video Select switch:
Select the HD video output resolution.
n
Camera Settings DIP switches:
Set camera behaviors such as IR remote frequency, baud rate and
image flip. See
for more information.
n
RS-232 connector:
Connect to the RS-232 port (if any) on the Quick-Connect device to allow an
external device to manage the camera using a modified VISCA protocol. See
for RS-232 settings.
n
EZPower Video:
supplies power to the camera and delivers HD video back to the Quick-Connect
interface using high speed differential signaling over Cat-5e cable. Connect to the EZPower Video port
on the Quick-Connect device. (Color-coded orange or yellow, depending on the device.)
n
36 VDC FOR CCU ONLY:
Power from the Quick-Connect Universal CCU.
Do not use this port
except when connecting to a Quick-Connect Universal CCU.
Note
A label on the bottom of the camera lists the rotary and DIP switch settings.
12
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
