ProductionVIEW HD
ProductionVIEW HD Manual 341-759 Rev. C
Page 13 of 24
Master Power, Manual and Auto Modes (continued)
Master Power Switch
•
When the Master Power Switch is powered down, all of the attached cameras will be placed in
standby. Press and hold the power switch for 3 seconds to initiate power down sequence. This is
a safeguard to prevent accidental shutdown.
•
When the Master Power Switch is powered up, all attached cameras will activate and select
default camera and preset information as defined in the menu. The ProductionVIEW HD will scan
the inputs for camera type and video signal type and auto-configure accordingly. This can take
up to one minute and is normal operation.
•
Note: When the camera control ports are changed or reconfigured, the “Rescan Cameras” option
in the menu must be selected and started to rescan the cameras and reload the proper control
codes
.
If only the video inputs are changed, then activate the Rescan Video function in the Main
Menu to reset the video input priorities.
ProductionVIEW HD Menu Structure
The ProductionVIEW HD has an 8-line LCD that displays the system menus. The menus are traversed
with the up/down arrows, select and cancel buttons. The menu structure is as follows:
1
st
Screen
ProductionVIEW
HD
V01.00.00
(software
version)
Rescan Cameras
Video
Output
Video
Input
Defaul
t Camera
Focu
s Near
Rescan Cameras
>Select (Note: Rescans all RS-232 ports for camera inputs)
>Start
Rescan Video
>Select (Note: Resets all inputs, outputs and video processor)
>Start
Video Output Menu
>Select
>Video Output
>Program
Output
HD
1080p
59.94
Hz
HD
1080p
50
Hz
HD
1080i
59.94
Hz
HD
1080i
50
Hz
HD
720p
59.94
Hz
HD 720p 50 Hz
HV 640 x 480 - 60 Hz
HV 640 x 480 - 75 Hz
HV 800 x 600 - 60 Hz
HV 800 x 600 - 75 Hz
HV 1024 x 768 - 60 Hz
HV 1024 x 768 - 75 Hz
HV 1280 x 768 – 60 Hz
HV 1280 x 1024 - 60 Hz
HV 1366 x 768 – 60 Hz
HV 1400 x 1050 – 60 Hz
HV 1600 x 1200 – 60 Hz
HV 1920 x 1200 – 60 Hz
SD
NTSC
S-Video
SD
PAL
S-Video
SD
NTSC
Composite
SD
PAL
Composite
>Preview Output (NOTE: Same resolution options as Program Output menu)
Menu Section
