link power
Sets the camera connection on or off.
Note
The camera extension module is not a camera control device. To set the camera to standby instead of
powering it off, use the camera's remote or other camera control interface to issue a standby command
directly to the camera.
Synopsis
link power { on | off }
Options
off
Powers off the camera connection.
on
Powers on the camera connection.
Examples
>
link power off
OK
>
Powers off the camera connection.
network settings get
Returns the current network settings for MAC address, IP address, subnet mask, and gateway.
Synopsis
network settings get
Example
>
network settings get
Name
eth0:WAN
MAC Address
00:1E:C0:F6:CA:7B
IP Address
192.168.1.67
Netmask
255.255.255.0
VLAN
Disabled
Gateway
192.168.1.254
OK
>
22
Integrator's Complete Guide to the OneLINK HDMI Extension Module for HDBaseT Cameras
