Operating the Camera
C
ONTROLS PAGE
(
USER OR GUEST ACCESS
)
The Controls page provides most of the same controls as the IR Remote Commander, along with some
that are not available from the remote:
n
Stop or resume transmitting live camera video
(video mute)
n
or bring it back to the ready state
n
camera presets
Stopping or Resuming Video
Use the Video Mute button to temporarily stop video from the camera without placing it in standby.
Remember that the mute button does not mute the room's microphones, conference phone, or your
computer's microphone. In video mute mode, the camera transmits blue or black video, with a message
that the video is muted.
Managing the Camera Ready State
Use the Standby button to switch between low-power (standby) and ready states.
In standby mode, the button is red and the screen presents the message “Device is in standby.”
27
Integrator's Complete Guide to the ConferenceSHOT FX USB 3.0 Fixed Camera
