system reboot
Reboots the system either immediately or after the specified delay. Note that a reboot is required when
resetting the system to factory defaults (system factory-reset).
Synopsis
system reboot [<seconds>]
Options
<seconds>
The number of seconds to delay the
reboot
Examples
system reboot
Reboots the system immediately.
system reboot 30
Reboots the system in 30 seconds.
system factory-reset
Gets or sets the factory reset status. When the factory reset status is on, the system resets to factory
defaults on reboot.
Synopsis
system factory-reset{ get | on | off}
Options
get
Returns the camera's current factory
reset status.
on
Enables factory reset on reboot.
off
Disables factory reset on reboot.
Examples
system factory-reset get
Returns the factory reset status in this form:
factory-reset (software):
off
(This evaluates the most recent
system factory-reset
on or off
command, if one has been received.)
factory-reset (hardware):
off
(This reads the rear panel DIP switches and returns the status
on
if
they are all in the down position.)
system factory-reset on
Enables factory reset upon reboot. Returns current status in this form:
factory-reset (software):
on
factory-reset (hardware):
off
40
Integrator's Complete Guide to ClearSHOT 10 USB Enterprise-Class PTZ Conferencing Cameras
