Web Tasks for Administrators: Soft Switch Settings, Reboots, Resets, and Updates
Things you can do on this screen:
n
Run a firmware update
n
Reboot the camera
n
Set the camera back to its original factory settings
n
Read (but not change) the current settings of the switches on the back of the camera
n
Read or change the "soft DIP switches" for baud rate and normal/super-wide operation.
Change Baud Rate
Use the on-screen Baud rate "DIP switch" to set either 38400 or 9600 baud.
Change Normal/Super-Wide Setting
Use the on-screen Super Wide "DIP switch" to set either normal or super-wide mode.
Reboot the Camera
This can help if the camera stops responding as you expect. In the System Utilities section, click Reboot.
27
Integrator's Complete Guide to ClearSHOT 10 USB Enterprise-Class PTZ Conferencing Cameras
