Configuring and Controlling the Camera
You can control the camera using the IR remote, web interface, Telnet session, or RS-232 command line –
but not at the same time. Choose the method that best meets the requirements.
Vaddio IR Remote Commander
The remote provides basic camera control for end users.
Quick Reference
What do you need to do?
Button(s)
Power on or standby
Power
(green button at top right)
Select the camera to control (if this
remote controls more than one)
Camera Select
buttons 1 through 3 (second row on the
remote)
Discover the camera's IP address
Data Screen
button (top left) – press and hold for 3
seconds.
Move the camera
Arrow buttons and
Home
button (dark red)
Move the camera to a preset position
Position Preset
buttons 1 through 6 (bottom two rows)
Focus the camera
Auto Focus
button (near arrow buttons)
Manual Focus
buttons
Near
and
Far
(below Zoom
Speed buttons)
Control zoom speed
Zoom Speed
buttons - Slow
T
and
W
, Fast
T
and
W
for
telephoto and wide-angle modes (light gray)
Adjust for excess light behind the
camera's subject
Back Light
button (top center)
11
Integrator's Complete Guide to ClearSHOT 10 USB Enterprise-Class PTZ Conferencing Cameras
