CeilingVIEW 70 PTZ - Document 010-2304-000 Rev.E
Page 11 of 14
The RJ-45 Connector labeled RS-232 IN (see page 4) has the
following pin-outs. The DSR and DTR are added to the Vaddio
CeilingVIEW 70 PTZ and other Vaddio products to support the Sony
Daisy-chain control standard (see Figure 11).
Do not attempt to take the camera module apart (other than for the
reasons stated in the manual). There are no user-serviceable
components inside.
•
Do not spill liquids onto the camera
•
Keep this device away from food and liquid
•
Avoid touching the lens
•
For smears or smudges, clear any dust with a blower and
wipe stains with a glass cleaner and clean, soft cloth.
•
To clean exterior of camera, wipe with a clean soft cloth. Do
not use any abrasive chemicals.
Do not operate the CeilingVIEW 70 PTZ under the following
conditions for any circumstance:
•
Temperatures above 104°F (40°C)
•
Temperatures below 32°F (0°C)
•
High humidity, condensing or wet environments
•
Dusty
environments
•
In inclement weather
•
Under severe vibration
o
Storage Temperatures:
-4
˚
F (-20
˚
C) to +140
˚
F (60
˚
C)
CARE AND
CLEANING
OPERATING
CONDITIONS
RS-232
Connection
Figure 11:
RS-232 IN pin-outs for RJ-45 connector on back of CeilingVIEW 70 PTZ
