VADDIO AV Bridge MatrixMIX Integrator'S Complete Manual Download

Page: 51 / 82

audio crosspoint-gain

Returns or sets the input routing gain, in dB, for a given output and input.

Synopsis

audio <output> crosspoint-gain <input> {get | set <level>}

Outputs

usb3_record_left

usb3_record_right

Gets or sets the gain for the input routed to the
USB3 Record Left/Right channel.

ip_out_left

ip_out_right

Gets or sets the gain for the input routed to the
left/right IP stream output.

program_out_left

program_out_right

Gets or sets the gain for the input routed to the
left/right program output.

preview_out_left

preview_out_right

Gets or sets the gain for the input routed to the
left/right preview output.

multiviewer_out_left

multiviewer_out_right

Gets or sets the gain for the input routed to the
left/right multiviewer output.

line_out_1

line_out_2

Gets or sets the gain for the input routed to Line
Out 1/Line Out 2.

Inputs

auto_mic_mix

Routing gain of the auto mic mixer for the chosen
output.

usb3_playback_left

usb3_playback_right

Routing gain of USB Playback Left/Right for the
chosen output.

line_in_1

line_in_2

Routing gain of Line In 1/Line In 2 for the chosen
output.

hdmi_in_

<1..8>

_left

hdmi_in_

<1..8>

_right

Routing gain of the specified HDMI input, left or
right channel, for the chosen output

Options

get

Returns the routing gain from the specified input to
the specified output.

set

<-12.00 .. 12.00>

Sets the routing gain from the specified input to
the specified output. Valid range is -12.00 dB to
12.00 dB.

Examples

audio line_out_1 crosspoint-gain hdmi_in_1_left get

3.95

Returns the current gain setting of the crosspoint between Line Output 1 and HDMI
Input 1 Left in dB.

audio usb3_record_left crosspoint-gain auto_mic_mix set 6.00

Sets the crosspoint gain of USB Record Left and the auto mic mixer to 6 dB.

Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher

Summary of Contents for AV Bridge MatrixMIX



















































































Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands

VADDIO AV Bridge MatrixMIX, Integrator'S Complete Manual

Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands