VADDIO AV Bridge 2x1 Complete Manual Download

Page: 8 / 93

Connector Panel

Network/PoE+

– Power, control via web interface, Dante audio, and IP streaming.

USB 3.0

– Uncompressed video output with PCM audio for conferencing applications.

RS-232

– Connect to an optional third-party control system.

Trigger

– Connect up to five trigger devices.

HDMI In 1

and

HDMI In 2

– HDMI video (and audio, if available) from the connected camera or other

HDMI source.

HDMI Out

– Output video (and audio, if available) from the selected input.

Audio In Mic/Line 1

and

Mic/Line 2

– Microphone or other audio inputs. Can be configured to supply

phantom power.

Audio Out Line 1

and

Line 2

– Far-end audio from conferencing application or as configured in the

audio matrix.

Complete Manual for the AV Bridge 2x1 Presentation Switcher

Summary of Contents for AV Bridge 2x1






























































































Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands

VADDIO AV Bridge 2x1, Complete Manual

Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands