Operating the AV Bridge 2x1
The AV Bridge 2x1 provides a web-based user interface in addition to the front panel controls for basic
functions.
To access the web interface, you may need to log in with the
user
account credentials,
depending on how the device is configured.
The admin login is not required.
Contact the administrator for information on accessing and logging in to the web interface.
To operate the device effectively, you will need to be able to view one of these:
n
HDMI output (the display connected to the device)
n
USB stream
n
IP stream
About Viewing Streams
The USB stream is always available to the computer directly connected to the device.
IP streaming is disabled by default. If you are unable to view the IP stream, this usually means it is not
enabled. Contact your system administrator.
To view the IP stream:
n
If RTMP streaming is selected, you will need to know the service provider and channel.
n
If RTSP streaming is selected, you will need to know the streaming URL for the IP stream. Contact
the system administrator for this information. It is available from Streaming page in the admin portion
of the web interface.
n
You will need a stream viewer application such as VLC Media Player to view the RTSP stream.
To view the USB stream:
Connect a computer to the USB port on the device, and do one of these things:
n
Open a stream viewer and select the camera as the video capture device.
n
Start or join a conference.
When viewing either stream, keep in mind that there is always inherent latency and network-dependent
latency, so the video and audio may not be perfectly synchronized. An audio delay adjustment is
available to administrators on the Audio page of the web interface.
Operator's Guide for the AV Bridge 2x1 Presentation Switcher
2
