RS-232 Serial Communication Settings and Port Pin-outs
The EasyIP Mixer and EasyIP 20 camera have RS-232 serial ports (color-coded blue) to connect to a third-
party controller.
Depending on the equipment connected to the RS-232 port, you may need a null-modem (crossover) cable.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
EasyIP Mixer
RS-232 connector pin-out:
n
Pin 1: Not used
n
Pin 2: Not used
n
Pin 3: Not used
n
Pin 4: Not used
n
Pin 5: Not used
n
Pin 6: GND
n
Pin 7: TXD (to RXD of connected device)
n
Pin 8: RXD (from TXD of connected device)
Communication parameters:
Parameter
Value
Communication Speed
38400 baud
Start bits
1
Stop bits
1
Data bits
8
Parity
None
Flow control
None
14
Installation Guide for EasyIP Systems
