Selecting the Camera to Control with the Remote
Press Camera Select button 1, 2, or 3 to select or change the IR command frequency. The camera using
that frequency will recognize commands from the remote; the others will not.
Indicator Light Behavior
S
YSTEM PAGE
, G
ENERAL TAB
Indicator light behaviors include:
n
LED on – By default the indicator is on when the camera has power.
n
LED on in standby – By default the indicator remains on while the camera is in standby (low-power
mode).
n
LED color scheme – By default the EasyIP 10 camera uses the Unified Conferencing color scheme; its
indicator light is blue when it is active. The EasyIP 20 camera uses the Pro AV color scheme, so its
indicator light is red when it is the selected video input.
Setting the Home Position and Other Preset Shots
C
AMERA PAGE
Presets are saved shots. Each preset includes pan, tilt, zoom, and (optionally) color settings. When you
reboot the camera or bring it out of standby, it returns to the Home preset.
Home and presets 1 through 6 are available with the IR Remote Commander; the others are only available
from the web interface.
79
Complete Manual for EasyIP Systems
