Access the Web Interface of an EasyIP Camera Manually
After you have done the initial device set-up for the EasyIP Decoder or EasyIP Mixer, you will be able to
use its web interface to locate and browse to your EasyIP cameras.
To discover a camera's IP address from an EasyIP Decoder:
1. Go to the Directory page.
2. If the system is already in service and cameras are paired to it, select their IP addresses to go directly
to their web interfaces.
3. If the device does not yet have paired cameras, follow the instructions for
.
To discover a camera's IP address from an EasyIP Mixer:
1. Go to the Video Inputs page.
2. If the system is already in service and you need to discover a paired camera's IP address or access its
web interface, select the appropriate EasyIP tab to display its information.
3. If the camera is not already paired to the device (for example, if you are in the process of doing initial
set-up and system administration for a new installation), select an EasyIP tab.
4. Select Settings to open the pairing dialog.
5. Select Discover Devices.
The web interface returns a list of EasyIP cameras on the EasyIP Mixer's subnet.
6. Select the camera's IP address to go directly to its web interface.
27
Complete Manual for EasyIP Systems
