Pairing EasyIP Devices
Because EasyIP products connect to each other over the IP network, they must be logically associated to
each other to work together.
This chapter covers
n
Locating EasyIP devices
n
Pairing cameras to the EasyIP Decoder
n
Pairing cameras to the EasyIP Mixer
n
Routing EasyIP microphones to the EasyIP Mixer
Locating and Pairing to Cameras on the Network – EasyIP Decoder
D
IRECTORY PAGE
Cameras are paired to the EasyIP Decoder if they are in its directory. Cameras may be paired to two host
devices.
Status indications tell you whether each camera is currently available.
n
Disconnected
– The camera is currently unavailable, or the input is not paired to a camera.
n
Unauthenticated
– A camera is paired, and is waiting for you to log in as admin from this device.
n
Connected
– A camera is paired, ready to send video and accept commands.
Locating and pairing to cameras works similarly on the EasyIP Mixer, but the web interface page structure
is somewhat different.
35
Complete Manual for EasyIP Systems
