camera focus
Changes the camera focus.
When sending the command to a host device, you must specify the camera input.
Synopsis (host
device)
camera
<input>
focus { near [<speed>] | far [<speed> | stop | mode {get | auto |
manual} }
Synopsis (camera) camera focus { near [<speed>] | far [<speed> | stop | mode {get | auto | manual} }
Options
<input>
Specifies the camera to control.
EasyIP Decoder: 1 to 4.
EasyIP Mixer: 2 to 5.
near
Brings the focus nearer to the camera. Can only be
used when camera is in manual mode.
far
Moves the focus farther from the camera. Can
only be used when camera is in manual mode.
<speed>
Optional: integer (1 to 8) specifies the focus
speed.
mode [get | auto | manual]
Returns the current focus mode, or specifies
automatic or manual focus.
stop
Stops the camera's focus movement.
Examples
camera focus near 2
OK
>
(Sent to the camera) Brings the focus near at a speed of 2.
camera 2 focus mode get
auto_focus:
on
OK
>
(Sent to the host device) Returns the current focus mode of the specified camera.
114
Complete Manual for EasyIP Systems
