Independent Valve Marketing (Pty) Ltd
Engineering
Page 16 of 18
VSS0203WD00
PIPELINE FILLING
Venting of large quantities of air
During pipeline filling a large amount of air needs to escape from the pipeline, during this operation
shown in figure 5- the small orifice, item 1 gives way and air discharges through the anti-shock
orifice, item 2, through the upper float.
This discharge will be sufficient for the pressurised air to evacuate the valve and the pipeline. This
type of valve operation is validated by Surge Analysis Software. It is not necessary for some or all
the air to exhaust through the large orifice as on other air valves.
After the air has exhausted from the pipeline and water fills the air valve, the smart anti-shock orifice
will shut and the air valve will once again pressurise.
Figure 6- Air Valve Anti-Shock Operation
Summary of Contents for 025VA25
Page 1: ...AIR RELEASE AND VACUUM BREAK VALVES SERIES VA OWNER S MANUAL...
Page 7: ...Independent Valve Marketing Pty Ltd Engineering Page 7 of 18 VSS0203WD00...
Page 8: ...Independent Valve Marketing Pty Ltd Engineering Page 8 of 18 VSS0203WD00...
Page 9: ...Independent Valve Marketing Pty Ltd Engineering Page 9 of 18 VSS0203WD00...