vacuubrand RE 2.5, Instructions For Use Manual

Page: 38 / 80

38 20901559_EN_RE_RZ_V7_230523
Installation and connection
Connect the vacuum pump electrically
2
1
(1)
(2)
1. 1. Plug connector (1) of the power cord into the power
connection of the vacuum pump.
2. 2. Plug power plug (2) into the power outlet.
5
Vacuum pump electrically connected.
>
Only use a power cord which is undamaged and meeting
the regulations.
>
Plug the power plug only into a properly grounded power
outlet.
>
Lay the power cord such that it cannot be damaged by
sharp edges, chemicals, or hot surfaces.
>
Keep the electrical power cord away from hot surfaces.
>
Keep the electrical power cord away from heated surfaces.
>
The power plug serves as a disconnecting device from the
electrical supply voltage. The product must be installed
in such a way that the power plug is easily reached and
accessible at all times to disconnect the product from the
mains supply.

Example
Electrical connection
of vacuum pump
IMPORTANT!