page 81 of 88
Warranty
For cleaning we use an environmentally friendly water based process. Un-
fortunately the combined attack of elevated temperature, cleaning agent,
ultrasonic treatment and mechanical stress (from pressurised water) may
result in damage to the paint. Please mark in the health and safety clear-
ance form if you wish a repaint at your expense just in case such a dam-
age should occur. We will also replace parts for cosmetic reasons at your
request and at your expense.
Before returning the device
Pack the device properly, if necessary, please order original packaging
materials at your costs. Mark the package completely
Enclose the completed health and safety clearance form.
Notify the carrier of any possible contamination if required.
Scrapping and waste disposal
Dispose of the equipment and any components removed from it safely
in accordance with all local and national safety and environmental re-
quirements. Particular care must be taken with components and waste
oil which have been contaminated with dangerous substances from your
processes. Do not incinerate fluoroelastomer seals and O-rings. You may
authorize us to dispose of the equipment
at your expense
. Otherwise
we return the device at your expense.
VACUUBRAND shall be liable for insuring that this product, including any
agreed installation, has been free of defects at the time of the transfer of risk.
VACUUBRAND shall not be liable for the consequences of improper han-
dling, use, servicing or operation of this product or the consequences of
normal wear and tear of wearing parts such as diaphragms, seals, valves,
vanes, condensers, oil and the breakage of glass or ceramic parts, for
the consequences of chemical, electrochemical or electrical influences or
the failure to follow the instructions in this manual.
Claims for defects against VACUUBRAND shall be limited to one year
from delivery. The same shall apply to claims for damages irrespective of
legal grounds.
For further information on general terms and conditions refer to www.
vacuubrand.com.
Summary of Contents for ME 2 NT
