page 55 of 68
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. manual-no.: 999290 / 12/12/2016
C U S T O M I S E D M O T O R S F O R Y O U R B U S I N E S S
WWW.ELNOR.BE
Symbols, used in this document:
Risk for damage or injury:
Risk for electric shock:
Hot surface:
Risk for explosion:
1.
Version of document
00: Initial version
2.
General information and objective
The operating instructions contain important information for operation and service. The operating instructions
are written for all personnel who assemble, install and operate this product.
The operating instructions must be legible and accessible at all times. Please make sure that staff
responsible for the plant and its operations, have read these instructions carefully and have understood
them.
If you are unclear about any of the
information’s
in this documentation, of if you require further information,
please contact Elnor Motors.
3.
Installation and Storage
Do not store or use the product in the following locations, subject to:
• ambient temperature exceeding
this specification.
•
high humidity or condensation due to severe temperature fluctuations.
• dust or salts.
• water, oil, or chemicals
affecting the Ex properties of the motors
• shock or vibration.
