2-Channel Mobile Video Recorder User Manual
4
Indicator
frequency for event recording).
(b)
Blue flashing: F/W updating. Red light on means
device error.
(c)
Blue light: WiFi connection.
14 Input
(a)
Power and signal input:
i.
Power input DC12V
ii.
ACC signal: power input range DC10.0v ~
DC14.5v。
iii.
LAMP signal: power input range DC10.0v ~
DC14.5v for external alarm triggered event
recording.
(b)
Video input: please protect with waterproof tape on
connectors after cabling.
(c)
Other: GPS, speed, microphone audio input.
(d)
WiFi
(e)
Infrared remote control reception.
(f)
SD card socket.
15 Explanation
(a)
Please install device by professional installation
engineer; temporary installation is suggest to fixed
with tape included; please take high attention from
damaging motor oil and power supply.
(b)
Please keep device cabling from gasoline tube and oil
tank; please install DVR when engine is off.
(c)
Please don’t use micro-SD adaptor as recording
device, it may cause intermittent recording and
unstable connect from driving vibration.
(d)
Please use tape to seal connector well after cabling in
order to prevent cabling loosens and dirt, oil, water
from entering.
(e)
All cabling should be installed with fuse protection.
(f)
DVR should be fixed well to prevent moving and
causes device from damages.
(g)
GPS positioning precision is interfered by installation