background image

                                                   

 

 

Vehicle Video Recorder

 

User Manual

 

 

 

 

 

Safety Precautions 

 

Please Take and review some testing videos initially to make sure the 
images were recorded correctly. 
 
Please note that manufacturer, its subsidiaries and affiliates, and its 
distributors are not liable for consequential damages arising from any 
malfunction of main device accessory, including memory device that 
results in the failure of an image to be recorded or to be recorded in a 
way that is machine readable. 
 
Before using the product, please ensure that you read the safety 
precautions described below. Always ensure that the product is used 
correctly. 

 

Use only recommended power sources. 

 

Do not attempt to disassemble, alter or apply heat to the product. 

 

DO NOT apply multi cigarette lighter adapters-Applying such devices will 
cause unstable power input to damage the vehicle video recorder. 

 

Please always make sure all power connectors are fully secured. 

 

Avoid dropping or subjecting the product to severe impacts. 

 

To avoid the risk of injury, do not touch the interior of the product if it has 
been dropped or otherwise damaged. 

 

Stop using the product immediately if it emits smoke, a strange smell, or 
otherwise behaves abnormally. 

 

Do not use organic solvents such as alcohol, benzene, or thinner to clean 
the product. 

 

Do not let the product come into contact with water (e.g. sea water) or other 
liquids. 

 

Do not allow liquids or foreign objects to enter the VVR. 

 

Do not place the VVR near or in direct flame. 

 

Do not handle the power cord with wet hands. 

 

Do not use the equipment in a manner that exceeds the rated capacity of 
the electrical outlet or wiring accessories. 

 

Do not use if the power cord or plug are damaged, or not fully plugged into 
the outlet. 

 

Do not allow dirt or metal objects (such as pins or keys) to contact the 
terminals or plug. 

 

Avoid using, placing or storing the product in the humid or dusty areas.

   

Summary of Contents for VVG-CBN12

























Reviews: