- 12 -
4.3 Stream
In this page you can set parameters for Video Stream.
Profiles:
IP Camera supports dual video streams, select a draw down item to set video parameters.
Usually, the 1
st
stream is set to be high resolution for main monitoring, and 2
nd
stream is set to be
low resolution for multi channels displayed on a screen monitor.
Resolution:
Select the required image resolution for the streams.
Quality:
Select the quality you preferred, the higher you select the more bandwidth/storage
capacity it takes.
Framerate:
Select the framerate, the higher you select the more smooth video it displays and
bandwidth/storage capacity it takes.
Bitrate Limit:
Select the maximum bit rate for this stream.
QP:
Quantization Parameter ( 0- 51). The higher QP value the lower image data encoded ad less
bandwidth/storage capacity it takes.