23
SETUP
1)
Select language. System must reboot to change to the set
language.
2)
SYNC IPCAM PARA：Can set whether to start synchronization, you
can configure this interval.
3)
Can be set whether to open the map function.
4)
Firmware update: Save updated firmware on a USB and insert it to
the USB slot on the front panel. Click [USB UPDATE]. (Note: the
updated firmware must save on top layer on the USB).
5)
Config Initialize: Click [CONFIG INIT] to reset the system to factory
default setting.
6)
System Reboot: Click [REBOOT] to reboot the system.
