background image

 

Terms and Conditions

 

 

The overall risk, is that arising out of the use or performance of software and hardware 

products. This product will be informed, such as when it is used with certain device or 

other hardware, may enable you to carry out surveillance and data processing, which 

may be subject to or in violation of applicable law, which includes but is not limited to 

data privacy, and criminal law. Please check your use to comply with applicable laws is 

the responsibility of users themselves. 

 

 

 Limitation of liability

 

 

The provision of this paragraph is in effect to the maximum extent permitted by 

applicable law. In any situation Xia, VACRON or its dealer assumed any special, and 

accidentally of, and indirect of, and or any indirect loss (including but not limited to 

business profits loss, and business interrupted, and commercial information loss, and 

or any other money loss of compensation) due to using or cannot using of software 

products or provides or failed provides appropriate of support, even we of company 

has is informed this class damage of possibilities. If there is no willful misconduct or 

gross negligence, under any provision of this agreement, VACRON total liability, shall 

be limited to the amount actually paid. 

 

 

 Other conventions 

 

(A) Prohibition of reverse engineering, decompilation, splitting or rescind the contract   

within the scope allowed by the applicable law cannot be waived by, as well as 

any software and hardware components of the product. 

 

(B) As long as the recipient agrees to the terms of this agreement, you may 

permanently transfer rights of use of this product. 

 

 

 Closing remarks 

 

Without prejudice to any other rights, the company may terminate this license 

agreement. If you fail to comply with its terms and conditions, in which case you 

must destroy all copies of the software product. 

Summary of Contents for VDH-CK Series



































Reviews: