Vacron SA-650CF, User Manual, Page: 6 / 21

4
E. Recording and Stop Recording
1. Power on/Recording
:
Turn on the power, and it will take approximately 40 seconds to
boot up. During the recorder booting up, the CF card indicator
LED will start flashing as the recording is in progress.
Light indicator
:
●
Red light: light on, means power on; light off, means no
power/power off.
●
Yellow light: light flashing, means CF2 take recording; light
off means non-recording.
●
Green light: light flashing, means CF1 take recording; light off
means non-recording.
2. Power off/Stop recording:
Power off also stop recording, at then you can take out CF card
to read the recorded files.
Power Indicator LED
CF2 Indicator LED
CF1 Indicator LED