Vacron 4CH H.264, User Manual

Page: 20 / 93

17

Motion Area Setup
Setup by each small square.
Setup Operation Front Panel & Remote Controller USB Mouse
Area Selection [Up/Down/Left/Right] [Moving Cursor]
Set Detection Area: must set
on none detection
area(Transparent Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Clear Detection Area: clear the
set detection area: must set on
detection area(Green Area)
(1)Move to the area
(2)Press Enter to set the area
[Drag by Left Click]
Return to Upper Menu [MENU] [Right Click]

Record Duration
The duration of the recording after triggered: 10, 20… 60 sec. or off.

Buzzer Duration
The duration of the buzzer beeping after being triggered: 1, 5, 10, 15, 20, 30
sec.

Alarm Duration
Alarm out after alarm triggered: 1, 5, 10, 15, 20, 30 sec.

Event Popup
The Duration of single channel display after being triggered: 1, 5, 10, 15, 20
sec or off.
7.5 Network Setup

Mode
Set the connection method. Set: Static IP, DHCP, PPPoE.

Media Port
Port used for stream media. Default is port 9000.

WEB Port
Port used for web access. Default is port 80.

Command Port
Port used for settings. Default is port 8000.

Mobile Port
Mobile phone port (factory default): 15961.