Motorbike ACC ON
1. Method
2. Method
1. Method：Connect to battery, set up the
switch. Independent power supply
2.Method：Connect to Motorbike power
supply (ACC ON), when engine is on turn
on automatically.
Installation Diagram
Viewer Schematic Diagram
W iFi Connection
Caution
APP Player
1. Play store search” VacronPlayer” and download.
2. Open WLAN then link
「
SSID
」
, with password
「
12345678
」
.
3. Open APP ”VacronPlayer”, click
「
device list
」、「
open new
」
,
then type any name you like.
4. Click the device name just named, then switch to
「
all channel, the live view will show up right away.
5. There are four functions available
：
Live screen shoot
、
Live video record
、
video playback
、
video download.
6. Can also watch saved video or photo.
1. Live view will be delay because of the network data transmission.
2. Video playback can only be use if date is still on the SD card, if the data has
been rewrite, then will not able to be find/download.
3. Please disconnect the WiFi after use, otherwise might not able to use internet
on your device.
4. If there is not HUD as option, please use PC and mobile device once every
month to keep system run normally.
Camera
Power on/off
Vehicle DVR
Camera
USB WiFi
Car Camera
Car DVR
•
Installation on motorcycle
•
DVR installation diagram
Explanation
(a) Please install device by professional installation engineer; temporary
installation is suggest to fixed with tape included; please take high
attention from damaging motor oil and power supply.
(b) Please keep device cabling from gasoline tube and oil tank; please
install DVR when engine is off.
(c) Please don’t use micro-SD adaptor as recording device, it may
cause intermittent recording and unstable connect from driving
vibration.
(d) Please use tape to seal connector well after cabling in order to
prevent cabling loosens and dirt, oil, water from entering.
(e) All cabling should be installed with fuse protection.
(f) DVR should be fixed well to prevent moving and causes device
from damages.
(g) GPS positioning precision is interfered by installation position and
weather condition.
Attention
(a) Camera video and signal may be electromagnetic interfered of
installing on non-EMC certified vehicles.
(b) Please use alcohol to clean cable connectors to eliminate dust,
mud, oil, …etc. to ensure signal transmission and video quality.
(c) NTSC or PAL frequency should be set according to local TV system.
(d) The machine consumes micro electric current when standby. If the
vehicle wouldn’t be used for long time, please remove DVR power
to prevent power consumption to car battery. User needs to do time
calibration after reconnect the DVR to car battery.
(e) Boot screen and OSD interface is subject to change according to
software update or revision change without notice.
(f) Please remove the card and set to lock-state to avoid being
overwritten for important event or accident records.
(g) Please shut off power before installing or removing cameras to
protect from electric surge or short.
(h) DVR shuts off when ACC power is off, and DVR time setting is
rely on car battery.
CH1
Video speed
Video bar
Control bar
Shutdown
Minimize window
Open file,
choose file to play
Recoding date line
Backup tool
Screenshot tool
Setting
Reset tool
G-Sensor
CH2
* GPS/MAP/Audio,Not support on this model