Cleaning
Storage
This model is intended for indoor use only at commercial food service establishments.
It is designed to provide precise temperature control of water for closed loop circulation.
To extend the life of this model, please clean every 20 uses, or 100 hours of use.
1. Fill a container with a solution of water and vinegar.
2. Turn the circulator head on and let it circulate water for 20 minutes.
3. Repeat this process with a container full of clean water to rinse.
4. To clean the filter, unplug the machine and allow it to cool down.
Open the machine housing and use a soft brush to remove particles from filter.
1. Store the model in an upright position after use to prevent water from
leaking into the top portion.
2. If liquid gets into the top part of the model, turn the power off and dry
with a clean towel before use.
MAINTENANCE
4.
ISSUE
REMEDY
No power
to the unit
• Ensure the machine is properly plugged into a grounded outlet.
• Check the power cord for tears, frays, or other damage.
Do not use machine if the power cord is damaged.
The unit is no
longer heating
• Ensure that the water level is between the MIN and MAX fill lines
marked on the head. If not, allow the unit to cool and add water
until the level reaches between these 2 marks.
