description of parameters
vacon
•
15
24-hour s358 (0)40 837 1150 • Email: [email protected]
1 = Activity coding with direction
The constant speeds are selected according to the state of digital inputs and motor
direction. Four different speeds per direction are available.
DIE
[1,2,3]
Parameters SpeedRef
Priority Direction
[0;0;0]
2.2.3.1
(levelling speed)
0 low
forward
[
1
;0;0]
2.2.3.2
(nominal speed)
1 medium
forward
[0;
1
;0]
2.2.3.3
(limited speed)
2 high
forward
[0;0;
1
]
2.2.3.4
(inspection speed)
3 highest
forward
[0;0;0]
2.2.3.5
(preset speed 4)
0 low
reverse
[
1
;0;0]
2.2.3.6
(preset speed 5)
1 medium
reverse
[0;
1
;0]
2.2.3.7
(preset speed 6)
2 high
reverse
[0;0;
1
]
2.2.3.8
(preset speed 7)
3 highest
reverse
Table 4--2. Activity reference with direction.
2 = Binary coding
Eight different constant speeds are selected according to binary word formed through
digital inputs.
DIE
[1,2,3]
Parameters SpeedRef
Priority Direction
[0;0;0] 2.2.3.1
(levelling
speed)
-
irrelevant
[
1
;0;0]
2.2.3.2 (nominal
speed)
- irrelevant
[0;
1
;0]
2.2.3.3 (limited
speed)
- irrelevant
[
1
;
1
;0]
2.2.3.4 (inspection
speed)
- irrelevant
[0;0;
1
]
2.2.3.5
(preset speed 4)
-
irrelevant
[
1
;0;
1
]
2.2.3.6
(preset speed 5)
-
irrelevant
[0;
1
;
1
]
2.2.3.7
(preset speed 6)
-
irrelevant
[
1
;
1
;
1
]
2.2.3.8
(preset speed 7)
-
irrelevant
Table 4-3. Binary reference.
Speed reference [m/s] parameters (M2 -> G2.2.3)
Parameters in group 2.2.3 define the speed reference in linear magnitudes [m/s].
2.2.3.1 Levelling
Speed
2.2.3.2 Nominal
Speed
2.2.3.3 Limited
Speed
2.2.3.4 Inspection
Speed
2.2.3.5
Speed reference 4
2.2.3.6
Speed reference 5
2.2.3.7
Speed reference 6
2.2.3.8
Speed reference 7
2.2.3.9 Override
Speed
