14
BASIC FUNCTIONS
1. Making
Calls
To place a call:
Press and hold “END/ ” to power your phone on, as indicated by icons that appear on screen.
Enter the phone number (up to 32 digits) using the keypad. The phone number is displayed from
left to right.
Press “SEND”. The phone attempts to connect to the entered phone number (if service is
available).
You can also make calls from:
Your Phonebook or by using Speed Dial keys (see “Phonebook”).
2. Ending
Calls
To end a call, press “END/ ” or close folder. Call time for the just ended call will display,
along with the name and number of the connected party (if available). The phone will then
automatically revert back to Standby.
3. Answering
Calls
To answer an incoming call, open the folder and press any key. If your phone is registered for
Caller ID service, the caller’s phone number will display on screen, and that caller’s name will
also appear if the caller’s number recognized in the Phonebook.
4. Correcting
Entry
Errors
Press CLR to erase one character at a time. You can erase the entire entry field by pressing and
holding down CLR for one second.
5. Storing Phone Numbers
Phone numbers for frequently used services are pre-programmed into your phone. To store a
number:
- Press the STO (
…
) key after entering the number to store.
- Select a type of a phone number by scrolling “
◀▶
” and press “OK (
‥
)”.
- Press “EDIT (
…
)” and designate a name. Press “OK (
‥
)” to complete. Scroll “
▲
/
▼
” to edit the location number. Once you’ve finish editing, press “OK (
‥
)” to save.
- For more information, see “Phone Book”.
6. Volume