Vaco VAC1212W, Instruction Manual

Page: 10 / 83

10
TRANSPORT AND STORAGE
If you store or transport the device improperly, the device may be damaged. Note the
information regarding transport and storage of the device.
TRANSPORT
To make the device easier to transport, it is fitted with castors.
Before transporting the device, observe the following:
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out of the mains socket.
•
Drain the remaining condensate from the device.
•
Do not use the power cable to drag the device.
•
Only wheel the device on a level and smooth surface.
After transporting the device, observe the following:
•
Set up the device in an upright position after transport.
•
Leave the device to rest for 12 to 24 hours, so the refrigerant can accumulate within the
compressor. Wait 12 to 24 hours before switching the device back on! Acting contrary
might lead to compressor damage and a malfunctioning device. If so, any warranty claims
will be voided.
STORAGE
Before storing the device, drain the remaining condensate from the device.
When the device is not being used, observe the following storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and direct sunlight
•
with a cover to protect it from invasive dust if necessary
Place no further devices or objects on top of the device to prevent it from being damaged.
Remove batteries from the remote control.