background image

 
 

10 

 

3. Undo the latches and remove the power head from the container.   (fig.3) 
4. Clear all dirt or debris from the container and hose.  (fig.4) 
5. Check the hose, attachments, and power cord to verify that they have not been damaged. 

 
IMPORTANT! 

Clean or change the reusable cloth filter regularly for best performance. 

ALWAYS USE 

REUSABLE CLOTH FILTER FOR DRY VACUUMING

.  If the machine is used without the reusable cloth 

filter, the motor will burn out and the warranty will be voided.  Always keep spare filters on-hand.  

NOTICE! 

The filter included is made of high quality material designed to stop small dust particles. The filter 

should be used for dry pick-up only.  A dry filter is necessary to pick up dust.  If the reusable cloth filter is wet, 
it will clog quickly and be very difficult to clean.  Handle the filter carefully when removing it for cleaning and 
replacing it. Check the filters for tears or small holes, a small hole can let dust pass through and out of the 
cleaner. Do not use a filter with holes or tears; replace the filter immediately if a hole or tear is found. 

 

WARNING:

 

ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING 

THE POWER HEAD FROM CONTAINER.

 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
Installing Reusable Cloth Filter 

1.  Verify that the power cord is disconnected from the outlet.

fig.1

 

2.  Remove power head and place in upside down position. 
3.  Slide reusable cloth filter down over the filter cage making sure the whole cage is covered. (fig. 2 & 3) 
4.  Replace the power head on to the container. 

 
Removing and Cleaning Reusable Cloth Filter 

1.  With the removed power head in the upside down position.   
2.  Carefully remove the reusable cloth filter from the filter cage.  (fig. 4) Clean the filter by gently tapping or    
     brushing dirt off.  Cleaning should

 not

 be done indoors in living areas.  

3.  Use a mild soap and water solution to wash reusable cloth filter and rinse with clean water. (fig. 5) 
4.  Allow the wet filter to air dry for 24 hours before installing onto the filter cage. 

 
 
 
 
 
 
 
 

Installing Foam Sleeve Filter 

1.  Verify that the power cord is disconnected from the outlet. (fig.1) 

INSTALLING & CLEANING FOAM SLEEVE FILTER 

 

INSTALLING & CLEANING REUSABLE CLOTH FILTER

 

Summary of Contents for VQ407S-A













Reviews: