background image

 
 

4

 

 
 
 

This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only 
identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before  
servicing.  Use this Wet/Dry Vac as described in this manual. 
Observe the following warnings that appear on the motor housing of your Wet/Dry Vac.

 

 

DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE ONLY 
IDENTICAL REPLACEMENT PARTS. 

 

WARNING:

 TO REDUCE THE RISK OF ELECTRIC SHOCK-DO NOT EXPOSE TO RAIN.  STORE 

INDOORS. 

 

WARNING:

  FOR YOUR OWN SAFETY, READ AND UNDERSTAND OPERATOR’S MANUAL. DO NOT 

RUN UNATTENDED.  DO NOT PICK UP HOT ASHES, COALS, TOXIC, FLAMMABLE OR OTHER 
HAZARDOUS MATERIALS, DO NOT USE AROUND EXPLOSIVE LIQUIDS OR VAPORS. 

 

CAUTION: 

• Do not vacuum drywall dust or fireplace soot or ash with standard Wet/Dry filter. This is a very fine dust    
  which will not be captured by the filter and may cause damage to motor.   When vacuuming fine dust use a   
  fine dust filter.

 

 

WARNING:

  

SERVICING OF DOUBLE-INSULATED WET/DRY VACUUMM 

WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE PROVIDED 
INSTEAD OF GROUNDING. NO GROUNDING MEANS IS PROVIDED ON A DOUBLE-INSULATED 
APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED. SERVICING A DOUBLE 
INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND KNOWLEDGE OF THE SYSTEM, 
AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE PERSONNEL. REPLACEMENT PARTS FOR 
A DOUBLE-INSULATED WET/DRY VACUUM MUST BE IDENTICAL TO THE PARTS THEY REPLACE. 
YOUR DOUBLE-INSULATED WET/DRY VAC IS MARKED WITH THE WORDS ‘DOUBLE INSULATED’ 
AND THE SYMBOL         (SQUARE WITHIN A SQUARE) MAY ALSO BE MARKED ON THE 
APPLIANCE. 

 

• To reduce the risk of electric shock-unplug before cleaning or servicing. 
• DO NOT

 

use without filters in place. 

CAUTION:

 TO REDUCE THE RISK OF INJURY FROM MOVING PARTS- UNPLUG BEFORE 

SERVICING. 

 

 

 

 

When using an extension cord with your Wet/Dry Vac refer to the following table to determine the required 
A.W.G. wire size.  Before using the cleaner make sure the power cord and extension cord are in good 
working conditions.  Make repairs or replacements before using the vacuum cleaner.  Only use extension 
cords that are rated for outdoor use.   
 
   
 

 
 

 
 
 

 

Length of Extension Cord 

110V-120V 

25 Feet 

7.5 Meter 

50 Feet   

15.25 Meters

100 Feet 

30.5 Meters 

150 Feet  

45.7 Meters 

Amps 

A.W.G Wire Size 

0-6 18  16 

16  14 

7-10 18  16 

14 

12 

11-12 16 

16 

14 

12 

13-16 14 

12 

Not 

recommended 

DOUBLE INSULATION INSTRUCTIONS

EXTENSION CORDS

Summary of Contents for VP205













Reviews: