background image

3

IMPORTANT SAFETY INSTRUCTIONS

SAVE THIS MANUAL FOR FUTURE REFERENCE.

READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THIS VACUUM. 

Read and understand this operator’s manual and all labels on the Wet/Dry Vacuum cleaner before 

operating. Safety is a combination of common sense, staying alert and knowing how your vacuum 

works. Use this Wet/Dry Vacuum only as described in this manual. To reduce the risk of personal 

injury or damage to your Wet/Dry Vacuum, use only manufacturer recommended accessories.

When using a vacuum, basic precautions should always be followed including 

the following.

Failure to follow the warnings and instructions may result in explosion, fire and/

or serious injury.

•  Do not run vacuum unattended.

•  Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where 

they may be present.

•  Do not vacuum, or use this vacuum near flammable liquids, gases, or explosive vapors like 

gasoline or other fuels, lighter fluids, cleaners, oil-based paints, natural gas, hydrogen, or 

explosive dusts like coal dust, magnesium dust, grain dust, or gun powder. Sparks inside the 

motor can ignite flammable vapors or dust.

•  To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic materials.

•  Do not use or store near hazardous materials.

•  Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

•  Do not expose to rain. Store indoors.

•  If vacuum is not working as it should, has been dropped, damaged, left outdoors, or dropped 

into water, return it to a service center.

•  Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

•  Do not use with damaged cord or plug.

•  Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around 

sharp edges or corners.

•  Keep cord away from heated surfaces.

•  Do not run the vacuum over cord.

•  Do not handle plug or vacuum with wet hands.

•  Do not use without dust bag and/or filters in place.

•  Do not allow to be used as a toy. Close attention is necessary when used by or near children.

•  To reduce the risk of injury from accidental starting, unplug power cord before changing or 

cleaning filter.

•  Do not leave vacuum when plugged in. Unplug from outlet when not in use and before servicing.

•  Turn off all controls before unplugging.

•  Unplug before connecting or disconnecting hose, or any other accessories.

•  Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, 

hair, and anything that may reduce air flow.

•  Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

•  Use extra care when cleaning on stairs.

•  Use only as described in this manual. Use only manufacturer’s recommended attachments.

•  This vacuum is provided with double insulation. Use only identical replacement parts. DOUBLE 

See DOUBLE INSULATION INSTRUCTIONS. 

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

        CAUTION:

 To reduce the risk of injury from moving parts - Unplug before servicing.

Summary of Contents for VOC508S 1101


















Reviews: