1.
2.
DO NOT USE dust filter for wet materials.
OPERATING INSTRUCTIONS: WET VACUUMING
3.
4.
WET-VACUUM OPERATION
WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY
INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS &
WARNINGS’. DO NOT VACUUM IN AREAS WITH
FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN
THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT
ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE
CLEANERS, OIL-BASE PAINTS, GASOLINE, ALCOHOL OR
AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT
ARE NOT LIMITED TO; COAL, MAGNESIUM, GRAIN OR GUN
POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS
FROM VAPORS OR DUST, DO NOT VACUUM TOXIC
MATERIALS.
WARNING: DO NOT PLUG IN POWER CORD TO POWER
OUTLET. MAKE SURE PLUG IS DISCONNECTED BEFORE
CHANGING AND CLEANING FILTERS.
11
WET VACUUMING
Verify that the power cord is disconnected from the outlet. Verify that the
container is clean and free of dust and dirt (Fig. 1).
Remove the dust filter and dust bag, and install a foam filter over the filter
basket, and place the top section back on the container (Fig. 2).
Fit the desired nozzle onto the vacuum hose (Fig. 3).
Verify that the switch is in the ‘O’ position before plugging the power cord into the
outlet (Fig. 4). By flipping the switch to the “I” position
（
Fig. 5
）