12
care not to damage the bag (Fig. 5).
5. Place the power head back on the collection tank and secure it in place using the latches (Fig. 6).
OPERATING INSTRUCTIONS: DRY VACUUMING
6. Insert the locking end of the hose into the vacuum port on the power head and lock into place
(Fig. 7).
7. Insert the other end of the hose into the remote control handle (Fig. 8).
8. Choose the desired accessory and insert onto the remote control handle or the stainless steel
telescopic wand (Fig. 9). The air flow regulation on the remote control handle allows you to
manually change the amount of vacuum suction.
9. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the power
outlet. Plug the power cord into the outlet (Fig. 10 & 11).
10.Turn the motor on by flipping the switch to the ‘I’ ON position and begin vacuuming. Press
the vacuum mode button, indicated by the following symbol , on either the remote control
handle or the power head and operate the vacuum (Fig. 12).
11.Once you have completed vacuuming, switch off the vacuum by pressing the vacuum mode
button on either the remote control handle or the power head. Switch to the “O” OFF position
and unplug the power cord from the power outlet.
O = OFF I = ON = VACUUM MODE
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
DO NOT USE THE DUST BAG FOR LIQUID VACUUMING.
LIQUID VACUUM OPERATION
9
3
4
1
2
5
6
7
8
WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION
ENTITLED “IMPORTANT SAFETY INSTRUCTIONS”. DO NOT VACUUM IN AREAS WITH
FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE
GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT
TYPE CLEANERS, OIL-BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS.
EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR
LIQUID VACUUMING
Summary of Contents for VK809PIWR
Page 22: ...22 EXPLODED VIEW ...
