1 2
W A R N I N G : T O R E D U C E T H E R I S K O F E L E C T R I C S H O C K , U N P L U G B E F O R E
T R O U B L E S H O O T I N G .
TROUBLESHOOTING
S y m p t o m
P o s s i b l e C a u s e s
C o r r e c t i v e A c t i o n
Vacuum will not operate
1) No power supply.
1) Check power supply – cord,
b reakers, fuses.
2) Faulty power cord.
2) Unplug and check the power
cord. I f damaged, hav e it
rep aired b y a p rofessional.
3) Collection tank full.
3) Empty collection tank.
Dust comes out from motor
cove r.
1) The cartridge filter is missing
or damaged.
1) Attach or replace cartridge
filter.
Reduced efficiency and motor/
sp eed vi b ration.
1) There is a blockage in the
nozzle, hose, or the collection
tank inlet. The cartridge filter is
clogged by fine dust.
1) Check nozzle, hose and
c o l l e c t i o n t a n k i n l e t s f o r
b lockage. Take off the filter
and clean it or install a new
cartridge filter.
I n s t a l l i n g F o a m W e t F i l t e r
1. Verify that the power cord is disconnected from the outlet. (Fig.1)
2. Remove power head and place in upside down position. Follow instructions to remove
cartridge filter.
3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely
covered. (Fig. 2 & 3)
4. Place the power head onto the collection tank.
C l e a n i n g F o a m W e t F i l t e r
1. With the removed power head in an upside down position, carefully remove foam wet filter. (Fig.
4)
2. Use a mild soap and water solution to wash foam wet filter and rinse with clean water. (Fig. 5)
3. Allow filter to air dry before installing and using again.
INSTALLING & CLEANING FOAM WET FILTER
2
3
4
5
1
Summary of Contents for VJH1211PF 0201
Page 13: ...1 3 EXPLODED VIEW ...
