Vacmaster VJF608PF 0201 User Manual Download Page 13

Page: 13 / 15

INSTALLING & CLEANING CARTRIDGE

FILTER

INSTALLING CARTRIDGE FILTER

REMOVING & CLEANING CARTRIDGE FILTER

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

2. Remove the power head and place in an upside down position.

3. Install the cartridge filter over the filter cage making sure the cage is completely covered (Fig. 2

& 3).

4. Place the filter retainer on the top of the cartridge filter over the raised lip and tighten down by

turning the retainer clockwise; do not over-tighten (Fig. 4 & 5).

5. Place the power head back onto the collection tank.

1. Unlock and remove the filter retainer by turning the retainer handle counter clockwise.

2. With the removed power head in an upside down position, carefully remove the cartridge filter

from the filter cage (Fig. 6).

3. Clean the cartridge filter by gently tapping or brushing dirt off. Cleaning should not be done

indoors in living areas. For optimal performance a new filter is recommended.

4. Install cleaned or new filters as above in steps 2-4 of Installing Cartridge Filter.

5. Allow wet filters to air dry for 24 hours before installing onto the filter cage.

Summary of Contents for VJF608PF 0201















